IEC 60598-2-1-2020 Luminaires – Part 2-1: Particular requirements – Fixed general purpose luminaires.
1.1 Scope
This part of IEC 60598 specifies requirements for fixed general purpose luminaires for use with electric light sources on supply voltages not exceeding 1 000 V.
1.2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
IEC 60598-1 , Luminaires – Part 1: General requirements and tests
1.3 Terms and definitions
For the purposes of this document, the terms and definitions given in Part 1 apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
• IEC Electropedia: available at http://www.electropedia.org/
• ISO Online browsing platform: available at http://www.iso.org/obp
1.4 General test requirements
The provisions of Section 0 of Part 1 apply. The tests described in each appropriate section of Part 1 shall be carried out in the order listed in this document.
1.5 Classification of luminaires
Luminaires shall be classified in accordance with the provisions of Section 2 of Part 1 .
1 .6 Marking
The provisions of Section 3 of Part 1 apply.
1.7 Construction
The provisions of Section 4 of Part 1 apply.
1 .8 Creepage distances and clearances
The provisions of Section 1 1 of Part 1 apply.
1.9 Provision for earthing
The provisions of Section 7 of Part 1 apply.
1 .1 0 Terminals
The provisions of Sections 1 4 and 1 5 of Part 1 apply.
1.1 1 External and internal wiring
The provisions of Section 5 of Part 1 apply.
1 .1 2 Protection against electric shock
The provisions of Section 8 of Part 1 apply.
1.1 3 Endurance tests and thermal tests
The provisions of Section 1 2 of Part 1 apply.
Luminaires with an IP classification greater than IP20 shall be subjected to the relevant tests of 1 2.4, 1 2.5, 1 2.6 and 1 2.7 of Section 1 2 of Part 1 after the test(s) of 9.2 but before the test(s) of 9.3 of Section 9 of Part 1 as specified in Clause 1 .1 4 of this document.
1.1 4 Resistance to dust, solid objects and moisture
The provisions of Section 9 of Part 1 apply.
For luminaires with an IP classification greater than IP20, the order of the tests specified in
Section 9 of Part 1 shall be as specified in Clause 1 .1 3 of this document.
1.1 5 Insulation resistance and electric strength, touch current and protective
conductor current
The provisions of Section 1 0 of Part 1 apply.
1.1 6 Resistance to heat, fire and tracking
The provisions of Section 1 3 of Part 1 apply.IEC 60598-2-1 pdf download.