NFPA 30B-1998 Code for the Manufacture and Storage of Aerosol Products.
2-4 Heating Equipment. Heating equipment shall be installed in accordance with the applicable requirements of NFPA 31, Standard for the Installation of Oil-Burning Equipment; NFPA 54, National Fuel Gas Code; NFPA 58, Liquefied Petroleum Gas Code; NFPA 8502, Standard for the Prevention of Furnace Explosions/Implo- sions in Multiple Burner Boilers; and NFPA 8501, Standard for Single Burner Boiler Operation. 2-5 Flammable Liquids and Gases. Areas in which flammable liquids and flammable gases are handled or stored shall meet the applicable requirements of NFPA 30, Flammable and Combus- tible Liquids Code, and NFPA 58, Liquefied Petroleum Gas Code. 2-6 Fire Protection. 2-6.1 Automatic Sprinkler Protection. Installations of auto- matic sprinklers, where required by this code, shall be installed in accordance with NFPA 13, Standard for the Installa- tion of Sprinkler Systems, and shall also meet applicable require- ments of NFPA 231, Standard for General Storage; NFPA 231C, Standard for Rack Storage of Materials; and the provisions of this code. 2-6.2 Standpipe and Hose System. Installations of standpipe and hose systems, where required by this code, shall be designed and installed in accordance with NFPA 14, Standard for the Installation of Standpipe and Hose Systems, and with the provisions of this code. Only combination or spray hose noz- zles shall be used. 2-6.3 Portable Fire Extinguishers. Fire extinguishers shall be provided in accordance with NFPA 10, Standard for Portable Fire Extinguishers.
3-3 Basic Requirements. 3-3.1 Manufacturing buildings shall be located at least 25 ft (8 m) from the nearest property line that is or can be built upon. 3-3.2 Flammable propellant storage tanks shall be located in accordance with the provisions of NFPA 58, Liquefied Petroleum Gas Code. 3-3.3 Flammable and combustible liquids shall be stored in accordance with the provisions of NFPA 30, Flammable and Combustible Liquids Code. 3-3.4 Flammable propellant charging and pump rooms shall be separated from adjacent buildings or structures by non- communicating walls or by a distance of at least 5 ft (1.5 m) and from inside areas by noncommunicating walls. Flamma- ble propellant charging and pump rooms shall be separated from flammable propellant storage tanks and from flammable and combustible liquids storage by a distance of at least 25 ft (8 m).NFPA 30B pdf download.