AS ISO 9245:2021 Earth-moving machinery一Machine productivity一Vocabulary, symbols and units

AS ISO 9245:2021 Earth-moving machinery一Machine productivity一Vocabulary, symbols and units.
AS ISO 9245 gives a vocabulary of terms, their definitions, symbols and units used in the determination and presentation of the productivity of earth-moving machinery as defined in ISO 6165, except for graders, rollers, compactors and pipelayers.
It does not in itself specify any rules for the determination of productivity nor does it give details on the form in which the productivity of earth-moving machinery should be presented.
2 Normative reference
The following standard contains provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the edition indicated was valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent edition of the standard indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.
150 6165:1987, Earth-moving machinery — Basic types — Vocabulary.
3 Terms and definitions
In terms 3.1, 3.1.1 and 3.1.2. “productivity” requires that the following details, amongst others, shall be given:
a) technical data of the machine, equipment and attachments fitted which would influence productivity;
b) type of material in accordance with national soil classifications and, if required, soil characteristics such as particle-size distribution, density, humidity;
c) condition of material on which the productivity is based, e.g. bank or loose soil;
d) type of operation (e.g. trench excavation, loading of spoil, load and carry) and conditions of operation (e.g. excavation depth, cutting height, scraping depth, swing angle of excavator, condition of haul roads and tracks, configuration of ground);
e) type of receiving equipment (e.g. haulage machine, body height, hopper, stockpile);
f) weather (e.g. temperature, rain, snow);
g) place, date and time.
3.1
productivity
Measured volume of material moved per unit of time, in cubic metres per hour.
3.1.1
basic (theoretical) productivity
Productivity, in cubic metres per hour, attainable for a short period with the respective equipment under given operating conditions and for a given type of material. Influences liable to reduce the productivity arising from the condition of the equipment, from the organization of the construction site and from the weather are not taken into consideration here. An operator of average ability is assumed.AS ISO 9245 pdf download.