IEC 60598-2-1-2020 Luminaires – Part 2-1: Particular requirements – Fixed general purpose luminaires

IEC 60598-2-1-2020 Luminaires – Part 2-1: Particular requirements – Fixed general purpose luminaires. 1.1 Scope This part of IEC 60598 specifies requirements for fixed general purpose luminaires for use with electric light sources on supply voltages not exceeding 1 000 V. 1.2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60598-1 , Luminaires – Part 1: General requirements and tests 1.3 Terms and definitions For the purposes of this document, the terms and definitions given in Part 1 apply. ISO and IEC maintain terminological databases for use in standardization at the following addresses: • IEC Electropedia: available at http://www.electropedia.org/ • ISO Online browsing platform: available at http://www.iso.org/obp 1.4 General test requirements The provisions of Section 0 of Part 1 apply. The tests described in each appropriate section of Part 1 shall be carried out in the order listed in this document. 1.5 Classification of luminaires Luminaires shall be classified in accordance with the provisions of Section 2 of Part 1 . 1 .6 Marking The provisions of Section 3 of Part 1 apply. 1.7 Construction The provisions of Section 4 of Part 1 apply. 1 .8 Creepage distances and clearances The provisions of Section 1 1 of Part 1 apply. 1.9 Provision for earthing The provisions of Section 7 of Part 1 apply. 1 .1 0 Terminals The provisions of Sections 1 4 and 1 5 of Part 1 apply. 1.1 1 External and internal wiring The provisions of Section 5 of Part 1 apply. 1 .1 2 Protection against electric shock The provisions of Section 8 of Part 1 apply. 1.1 3 Endurance tests and thermal tests The provisions of Section 1 2 of Part 1 apply. Luminaires with an IP classification greater than IP20 shall be subjected to the relevant tests of 1 2.4, 1 2.5, 1 2.6 and 1 2.7 of Section 1 2 of Part 1 after the test(s) of 9.2 but before the test(s) of 9.3 of Section 9 of Part 1 as specified in Clause 1 .1 4 of this document. 1.1 4 Resistance to dust, solid objects and moisture The provisions of Section 9 of Part 1 apply. For luminaires with...