NFPA 2112-2018 Standard on Flame-Resistant Clothing for Protection of Industrial Personnel Against Short-Duration Thermal Exposures from Fire

NFPA 2112-2018 Standard on Flame-Resistant Clothing for Protection of Industrial Personnel Against Short-Duration Thermal Exposures from Fire. 4.4 Manufacturer’s Quality Assurance Program. 4.4.1 General. 4.4.1.1 The manufacturer shall provide and maintain a quality assurance program that includes a documented inspection and product recall system. 4.4.1.2 The manufacturer shall have an inspection system to substantiate conformance to this standard. 4.4.1.3* The manufacturer shall be permitted to be registered to ISO 9001, Quality Management Systems — Requirements, in lieu of meeting the requirements of 4.4.2 through 4.4.8. 4.4.2 Instructions. 4.4.2.1 The manufacturer shall maintain written inspection and testing instructions. 4.4.2.2 The instructions shall prescribe inspection and test of materials, work in process, and completed articles. 4.4.2.3 Criteria for acceptance and rejection of materials, processes, and fnal product shall be part of the instructions. 4.4.3 Records. 4.4.3.1 The manufacturer shall maintain records of all “pass” and “fail” tests. 4.4.3.2 Records shall indicate the disposition of the failed materials or products. 4.4.4 Inspection System. The manufacturer’s inspection system shall provide for procedures that assure the latest appli‐ cable drawings, specifcations, and instructions are used for fabrication, inspection, and testing. 4.4.5 Calibration Program. 4.4.5.1 The manufacturer shall maintain, as part of the quality assurance program, a calibration program of all instruments used to ensure proper control of testing. 5.1 Product Label Requirements. 5.1.1* All fame-resistant clothing shall have a product label or labels permanently and conspicuously attached to each fame- resistant garment, shroud/hood/balaclava, and glove. 5.1.2 At least one product label shall be conspicuously located inside each fame-resistant garment, shroud/hood/balaclava, and glove. 5.1.3 Multiple label pieces shall be permitted in order to carry all statements and information required to be on the product label. 5.1.4* The certifcation organization’s label, symbol, or identi‐ fying mark shall be permanently attached to the product label or shall be part of the product label. 5.1.5 All worded portions of the required product label shall be printed in English. Supplementary languages, in addition to English, shall be permitted. 5.1.6 Symbols and other pictorial graphic representations shall be permitted to be used to supplement worded statements on the product label or labels. 5.1.7 Graphic representations shall be consistent to clearly communicate the intended message. 5.1.8 The following statement shall be printed legibly on the product label in letters at least 2.5 mm (0.10 in.) high: THIS CLOTHING ITEM MEETS THE REQUIREMENTS OF NFPA 2112-2018. NFPA 2113 REQUIRES UPPER AND LOWER BODY...