NFPA 2112-2001 Standard on Flame-Resistant Garments for Protection of Industrial Personnel Against Flash Fire. 2.1 General. The documents or portions thereoflisted in this chapter are referenced within this standard and shall be con- sidered part ofthe requirements ofthis document. 2.1.1 NFPA Publications. (Reserved) 2.1.2 Other Publications. 2.1.2.1 Stoll, A. M., and Chianta, M. A. “Method and Rating System for Evaluations ofThermal Protection,” AerospaceMedi- cine, Vol. 40, 1969, pp. 1232–1238. 2.1.2.2 Stoll, A. M. and Chianta, M. A. “Heat Transfer through Fabrics as Related to Thermal Injury,” Transactions- NewYorkAcademyofSciences, Vol. 33(7), Nov. 1971, pp. 649–670. 2.1.2.3 AATCC Publications. Association of Textile Chemists and Colorists, P.O. Box 12215, Research Triangle Park, NC 27709. AATCC 135, DimensionalChangesinAutomaticHomeLaunder- ingofWoven andKnitFabrics, 1989. AATCC 158, DimensionalChangesinDry-CleaninginPerchloro- ethylene: MachineMethod, 1990. 2.1.2.4 ASTM Publications. American Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA19428-2959. ASTM D 6413, TestMethodforFlameResistanceofTextiles (Ver- ticalTest), 1999. ASTM F 1930, Test Method for Evaluation ofFlame Resistant Clothing forProtection Against Flash Fire Simulations Using an In- strumentedManikin, 1998. 2.1.2.5 GSA Publication. General Services Administration, Specifications Activity, Printed Materials Supply Division, Building 197, Naval Weapons Plant, Washington, DC 20407. Federal Test Method Standard 191A, Textile Test Methods, July 20, 1978. 3.1 General. The definitions contained in this chapter shall apply to the terms used in this standard. Where terms are not included, common usage ofthe terms shall apply. 3.2 NFPA Official Definitions. 3.2.1* Approved. Acceptable to the authority having juris- diction. 3.2.2* Authority Having Jurisdiction. The organization, of- fice, or individual responsible for approving equipment, ma- terials, an installation, or a procedure. 3.2.3 Labeled. Equipment or materials to which has been attached a label, symbol, or other identifying mark ofan orga- nization that is acceptable to the authority having jurisdiction and concerned with product evaluation, that maintains peri- odic inspection of production of labeled equipment or mate- rials, and by whose labeling the manufacturer indicates com- pliance with appropriate standards or performance in a specified manner. 3.2.4* Listed. Equipment, materials, or services included in a list published by an organization that is acceptable to the au- thority having jurisdiction and concerned with evaluation of products or services, that maintains periodic inspection of production oflisted equipment or materials or periodic evalu- ation ofservices, and whose listing states that either the equip- ment, material, or service meets appropriate designated stan- dards or has been tested and found suitable for a specified purpose.NFPA 2112 pdf download.
Download Address
Download