BS EN 510-2019 Specification for protective clothing for use where there is a risk of entanglement with moving parts. This document specifIes design requirements at’ protective garments that minimize the risk ol Its entanglement or drawuig.rn by moving parts when the wearer Es working at or near hazardous moving machines or devices, complementary to the general requirements as stated in FN ISO I 3688 This document does nat include protective clothing against Inlurles by spectal moving machine parts for which specific standards exist. e.g. protective clothing for user of chainsaws (EN ISO 11393). 2 NormatIve references The following documents are reIemd to in the text in such a way that some or all of their content constitutes requirements of this document. Fur dated references, only the edition cited applies. Fur undated references, the btest edition of the referenced document (including any amendments) applies EN ISO I 3688:2013, Protecervt dothsn . General requirements (ISO 13688-2013) 3 Terms and definitions No terms and definitions are kited in this document ISO and IEC maintain terminobglcal databases for use In standardization at the following addresses: — IEC Elearopedla available at hjww.elcctropedja.org/ — ISO Online browsing platform: avaiLable at httpilw*w.Iso.orvjobp 4 RequlrernenLs 4.1 General The requirements of EN ISO 13688:2013 regarding mnnocunusness (42). comfort (44). ageing (5) apply. The design requirements in 42 shall be checked by vmsu.iI and manual inspection of the garment and if required, by testmg certain elements of the gannrnt 4.2 Design 42.1 BasIc design requirements 42.1.1 General The design requirements are complementary to subclause 4.3 of EN ISO 13688:2013. The design of the gannent shall comply with the following principles: a) a covering of any other garment b) acloselfl c) a smooth outer surface of 11w garment.BS EN 510 pdf download.
Download Address
Download