UL 60034-1:2018 Rotating Electrical Machines一Part 1: Rating and Performance.
This part of IEC 60034 is applicable to all rotating electrical machines except those covered by other IEC standards, for example, IEC 60349.
Machines within the scope of this document may also be subject to superseding, modifying or additional requirements in other standards, for example, IEC 60079 and lEG 60092.
NOTE If particular clauses of this document are modified to meet special applications, for example machines subject to radioactivity or machines for aerospace, all other clauses apply insofar as they are compatible.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
IEC 60027-1, Letter symbols to be used in electrical technology — Part 1: General IEC 60027-4, Letter symbols to be used in electrical technology — Part 4: Rotating electric machines
lEG 60034-2 (all parts), Rotating electrical machines — Part 2: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles)
lEG 60034-3, Rotating electrical machines — Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines
lEG 60034-5, Rotating electrical machines — Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) — Classification
lEG 60034-6, Rotating electrical machines — Part 6: Methods of cooling (IC code)
IEC 60034-8, Rotating electrical machines — Part 8: Terminal markings and direction of rotation lEG 60034-12:2016, Rotating electrical machines — Part 12: Starting performance of singlespeed three-phase cage induction motors
IEC 60034-15, Rotating electrical machines — Part 15: Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines
IEC 60034-18 (all parts), Rotating electrical machines — Part 18: Functional evaluation of insulation systems
lEG 60034-18-41, Rotating electrical machines — Part 18-41: Partial discharge free electrical insulation systems (Type I) used in rotating electrical machines fed from voltage converters — Qualification and quality control tests.UL 60034-1 pdf download.